Switch FS1010P 8xFE PoE+ 120W

Description: FS1010P 8-Port 10/100M PoE+ Switch with 2 Uplink Ports Supports IEEE802.3at and IEEE802.3af Total PoE output power 120W, up to 32W for one PoE port Support IEEE802.3x full duplex and half duplex flow control Support VLAN and CCTV functions Panel LEDs to monitor operating status and assist in fault analysis Perfect security mechanism | Switch class: Unmanaged | Application: Home and small office | Network architecture: FastEthernet | Number of 10/100 Mbps ports: 10 | Number of 10/100/1000 Mbps ports: None | 10/100/1000/2500 Mbps ports: None | Number of 10Gb ports: None | Number of PoE ports (PoE & PoE+): None | Number of PoE+ ports: 8 | Number of COMBO ports: None | Number of SFP ports: None | Number of SFP+ ports: None | Number of SFP56 ports: None | Number of QSFP+ ports: None | Console port: No | Forwarding mode: Store-and-forward | Throughput: 2 | Forwarding rate: 1.48 | MAC address table size: 8000 | Support for Jumbo frames: Yes | Jumbo frame size: 1.528 | Stackability: No | Supported protocols and standards: IEEE802.3 at IEEE802.3 af IEEE802.3 x IEEE802.3 az | Management, monitoring, configuration: Modes: VLAN, CCTV | Chassis type: Desktop | Fan : No | Power supply : Internal | Power consumption: 120 | Mean time between failures (MTBF): 50000 | Power supply: 100~240V AC 50/60Hz POE: Ports: 1-8 PoE budget: 120W Single Port Power: 32W | Dimensions: 220 x 150 x 44 mm | Weight: 1 | Environment requirements: Working temperature: 0°C ~ 40°C Storage temperature: -40°C ~ 70°C Operating humidity: 10% ~ 90% non-condensing Storage humidity: 5% ~ 90% non-condensing | Certificates: CE FCC Class A