Milling cutters and chisels for power tools, for joiners, builders and renovators who need extra or replacement accessories. The range covers cutters for shaping wood and board, plus chisels for hammers, from Makita, Bosch and DeWalt, with single models from Lanberg and Stanley.
How to choose milling cutters and chisels
Match the accessory to your machine. A milling cutter fits a router or trimmer and shapes edges, grooves and recesses in wood or board. A chisel for a rotary or demolition hammer breaks, chips and chases masonry or concrete. Decide which tool you own before comparing anything else.
Check the shank or fitting. Router cutters usually come with 6 mm, 8 mm, 12 mm or inch-sized shanks, and the shank must match the collet in your router. Chisels for hammers use fittings such as SDS-plus, SDS-max or hexagonal, and these are not interchangeable.
Look at the cutting material. Carbide-tipped cutters stay sharp for longer in hardwood, MDF and laminated boards, while plain high-speed steel suits occasional work in softwood. Chisels for masonry are forged from hardened steel, so a clean, even tip and a solid shaft matter more than any coating.
Choose the profile and size. For cutters, the profile (straight, rebate, chamfer, round-over) decides the shape of the cut, and the cutting diameter and length limit how deep you can go. For chisels, a pointed tip breaks material, a flat or wide blade chases channels or lifts tiles, and a longer chisel reaches further into a wall or floor.
Brands of milling cutters and chisels we carry
- Makita: the largest group in our range, from a Japanese maker known for routers, trimmers and rotary hammers, so its accessories sit naturally alongside those machines.
- Bosch: developed the SDS fitting system for rotary hammers, and its professional blue line is aimed at regular site and workshop use.
- DeWalt: known for yellow-and-black jobsite tools and matching accessories built for trades that use them daily.
Also in our range: Lanberg and Stanley.
Frequently asked questions about milling cutters and chisels
What is the difference between a milling cutter and a chisel?
A milling cutter spins in a router or trimmer and removes material to form grooves, edges and profiles, mostly in wood and board. A chisel is driven by hammering action and breaks or chips hard material such as brick, concrete or stone. They are not interchangeable, so choose by the tool you want to use them in.
What shank size do I need for a router cutter?
The shank must match the collet of your router, and the most common sizes are 6 mm, 8 mm and 12 mm, along with inch equivalents. Check the router's manual or the collet itself before ordering. A 12 mm shank is generally steadier for large cutters, but only if your router accepts it.
What does SDS-plus mean on a chisel?
SDS-plus is a fitting with a 10 mm grooved shaft that locks into lighter rotary hammers and lets the chisel slide back and forth freely. SDS-max is the larger 18 mm version used on heavier hammers. A chisel with one fitting will not work in a hammer built for the other.
Are carbide-tipped milling cutters worth it?
Yes, if you cut hardwood, MDF or laminated boards regularly. The carbide edge holds its sharpness far longer than plain steel and gives cleaner cuts with less burning. For an occasional job in softwood, a basic steel cutter can be enough.