Wire brushes for power tools are used to strip rust, old paint, weld scale and coatings from metal, wood and masonry. This category covers cup brushes, wheel brushes and end brushes that fit angle grinders, bench grinders and drills, and it suits DIYers, welders and workshop users.
How to choose a wire brush
Brush shape. Cup brushes cover large flat areas such as steel plate or fences quickly. Wheel brushes reach into corners and along weld seams, while end brushes clean small holes, pipe bores and tight recesses.
Wire material. Carbon steel wire is the usual choice for rust and paint on steel. Stainless steel wire is better for stainless work because it avoids leaving rust-causing particles in the surface. Brass wire is softer and suits delicate metals and polishing jobs where scratching must be kept low.
Twisted or crimped wire. Twisted knot wire is stiff and aggressive, which makes it the better option for heavy rust and thick weld spatter. Crimped wire is more flexible and gentler, so it suits lighter cleaning and finishing on thinner or softer material.
Fitting and diameter. Angle grinder brushes normally screw on to an M14 spindle, though some grinders use a different thread, so check yours first. Drill brushes have a round shank, commonly 6 mm, held in the chuck. Larger diameters clean faster, but a smaller brush gives more control in confined spaces.
Maximum speed. Every brush carries a maximum speed rating in rpm, and it must be at or above the speed of your tool. Angle grinders spin much faster than most drills, so a brush made for a drill should never be used on a grinder.
Brands and product types
- Cup brushes: Fitted to angle grinders, these are made for large surface preparation such as removing paint or corrosion from sheet and plate.
- Wheel brushes: Used on angle grinders and bench grinders, the narrow face works into weld beads, edges and grooves.
- End and pencil brushes: Mounted in a drill or die grinder, they clean inside holes and around small fittings.
No brands are listed for this category at the moment. When comparing makes, check that the maximum speed, thread size and wire material are stated clearly on the packaging.
Wire brush FAQ
Which wire brush is best for removing rust?
A twisted knot steel cup or wheel brush is the usual choice for heavy rust. Use a cup brush on flat panels and a wheel brush for seams and edges. For light surface rust, a crimped steel brush is gentler on the metal underneath.
Can I use a wire brush in a drill?
Yes, as long as the brush has a shank that fits your drill chuck and a speed rating above your drill speed. End brushes and small cup or wheel brushes on a shank are made for this. Do not fit a brush with an M14 thread to a drill unless it comes with a proper shank or arbour.
Should I choose steel or stainless steel wire?
Choose carbon steel for general rust and paint removal on steel, and stainless steel when working on stainless. Steel wire can leave particles in stainless surfaces, and these may later cause rust spots. Stainless wire costs more, so it is usually kept for the jobs that need it.
How do I use a wire brush on an angle grinder safely?
Wear safety glasses or a face shield, gloves and a dust mask, because loose wire strands and debris can be thrown off at speed. Hold the grinder with both hands and use light pressure, since pressing hard bends the wires and shortens the brush life. Check the brush for damage before each use and let it run up to speed away from the workpiece.
There are no products to list in this category.