Filter
Your Cart
Fastest and most convenient way to contact us is via email at info@itworkup.co.za
All emails will be replied to multiple times within 24 hours.
Alternatively, you can visit our offices.
Thank you for your continued support!

Torque wrenches

Torque wrenches

Torque wrenches are hand tools that tighten a nut or bolt to a set torque. This category suits mechanics, maintenance technicians and home users working on wheels, engines or bicycles. Our range here is small and currently holds a single model from BAHCO, a Swedish hand tool maker, so check the specification against your job before ordering.

How to choose a torque wrench

Torque range. Look at the lowest and highest values the wrench can set, and pick a model where your typical job sits in the middle of that scale. Most click-type wrenches are least accurate at the very bottom of their range, so a wrench for small fasteners and one for wheel nuts are rarely the same tool.

Drive size. The square drive must match your sockets. Common sizes are 1/4 inch for small fasteners, 3/8 inch for general work and 1/2 inch for larger bolts such as wheel nuts. An adaptor works in a pinch, but it can change the torque actually applied at the fastener, so buying the right drive size is better.

Wrench type. Click-type wrenches signal with a noise and a small movement when the set torque is reached, and they are the usual choice for workshops. Beam and dial wrenches show the value on a scale, while electronic models display it digitally and may record readings. Check which type the product page describes before you buy.

Accuracy and calibration. A torque wrench is only useful if its reading can be trusted. Look for a stated accuracy tolerance and a standard such as ISO 6789, and ask whether a calibration certificate is supplied. For professional or safety-related work, plan to have the tool re-checked at regular intervals.

Units and handling. Make sure the scale is in the units your service manual uses, usually newton metres (Nm) and sometimes foot-pounds. Length matters too: a longer wrench gives more leverage and finer control at higher torque, while a shorter one fits tighter spaces.

Torque wrench brands in our range

  • BAHCO: a Swedish manufacturer known for professional hand tools, including adjustable spanners, pliers and saws. The BAHCO torque wrench is the one model in this category at present.

Torque wrench FAQ

What is a torque wrench used for?

A torque wrench is used to tighten fasteners to a specific torque value given by the manufacturer. This prevents under-tightening, which lets parts work loose, and over-tightening, which can strip threads or stretch bolts. Typical jobs include car wheels, engine components, cycle parts and machinery maintenance.

How do I choose the right size of torque wrench?

Match the drive size to your sockets and the torque range to the values in your service manual. Ideally the torque you need should fall in the middle of the wrench's scale rather than at either end. If you work on both small and large fasteners, you may need two wrenches.

How often should a torque wrench be calibrated?

Many manufacturers suggest checking a torque wrench at least once a year, or sooner after heavy use or a drop. Professional workshops often follow a fixed schedule because of quality and safety requirements. For occasional home use, a check every few years may be enough, but the maker's instructions should decide.

Can I use a torque wrench to loosen bolts?

No, a torque wrench is meant for final tightening only. Using it to break loose a stuck bolt can strain the mechanism and throw off its calibration. Use a breaker bar or a standard ratchet for loosening, and keep the torque wrench for setting the final value. With a click-type wrench, the usual advice is to wind it back to its lowest setting after use.

Brand: BAHCO Stock: In Stock
R4,721
incl. VAT:R5,429
Add to Cart
Showing 1 to 1 of 1 (1 Pages)
Product Filter